This is quite a product!

HDbaseT HDMI extender System 3 Play.

The Aavara PE3D4K100 is a another fantastic tool for installers. Using just a single wire it can be easily retrofitted within an existing network. HDBaseT technology allows this system to send HDMI further and at higher quality than all other conventional HDMI over CAT5 solutions. With no compression and no loss of quality you can get crystal clear 3D 1080P with 7.1channel audio, and also have two-way IR control and two-way RS232 control all over the one cable!

Over one single run of CAT5 cable you can:
* send uncompressed full HD 3D HDMI with 7.1ch audio
* IR control the source from the receiver
* IR control the receiver from the source
* RS232 control the source from the receiver
* RS232 control the receiver from the source

The PE3D4K100 fully supports HDMI v1.4, allowing smooth 3D video transmission from 3D Blu-ray players to 3DTVs, fully HDCP compliance.







Have a look at the instruction sheet here (Acrobat pdf file)

PRODUCT FEATURES
* 100M Uncompressed 1080p HDMI video by single Cat5e/6/7 cable
* HDMI v1.4 3D Video Format Support for 3D blu-ray and TV
* 10.2 GHz Ultra High Performance support up to 4Kx2K resolution
* Two Way full range 20~60Khz IR Pass-Thru for controlling video source from Receiver side or/and control display from Sender side
* Two Way RS232 Control communication for Display or Video source control at remote side
* Support 36 bits Deep Color & CEC Pass-Thru
* DVI 1.0 & HDCP compliant
* Hassle free, plug n play

PRODUCT SPECIFICATION
* HDCP Spec.:v1.4 Compatible
* DVI Spec.:v1.0 Compliant
* HDCP Spec.:v1.1 Compliant
* Data Speed:Up to 10.2Gbps
* RS-232c connector:DB-9 Stanard Female Connector, Bi-direction transfer & up to 192,000 bps
* Two Way IR(Infrared) Pass:Signal frequency 20~60Khz, support any signal protocol
* Sender Connector:HDMI Input*1, HD AV Link(RJ-45) Port*1, RS232c*1, IR Emitter & Receiver Port*1, DC 5V Input Jack*1
* Receiver Connector:HDMI Onput*1, HD AV Link(RJ-45) Port*1, RS232c*1, IR Emitter & Receiver Port*1, DC 5V Input Jack*1
* Product Weight:Sender 300g, Receiver 300g
* Power Adapter:AC to DC Power Adapter 5V
* Power Consumption:<10W
* Product Dimension:130x97.5x28mm(LxWxH)
* Accessory:IR Emitter/ Receiver Cables (Included) Wall Mount Kit (Optional)

Accessories
Pair of mounting brackets (one pair needed per unit to be mounted) MK100