This is quite a product!

HDbaseT HDMI extender System.

The Aavara PE3D4K100A is a another fantastic tool for installers. Using just a single wire it can be easily retrofitted within an existing network. HDBaseT technology allows this system to send HDMI further and at higher quality than all other conventional HDMI over CAT5 solutions. With no compression and no loss of quality you can get crystal clear 3D 1080P with 7.1channel audio, and also have IR control, RS232 and extend your 100Mbps LAN all over the one cable!

Over one single run of CAT5 cable you can:
* send uncompressed full HD 3D HDMI with 7.1ch audio
* remotely power the receiver
* IR control the source from the receiver
* RS232 control the source from the receiver
* use the 3 port hub in the sender & receiver to extend your LAN

The Aavara PE3D4K100A features the latest HDBase-T technology, which can support uncompressed 4Kx2K (4096x2160p, 4 times Full HD 1080p), 48bits Deep Colour, 7.1 channels audio, Ethernet Network Link and Power Over Cable transmission up to 100M (330ft) over ultra long distance by using SINGLE Cat5e/6/7 cable.


It also fully supports HDMI v1.4, allowing smooth 3D video transmission from 3D Blu-ray players to 3DTVs, with fully HDCP compliance. Built-in 3 x 100Mbps Fast Ethernet RJ-45 ports at both sender and receiver allow Internet connected withTV, Video device and PC, keeps link with Internet.

Power Over Cat5 Cable design makes Receiver side powered directly without extra power adapter to Receiver unit. Convenient IR Pass-Thru function allows video sources to be controlled via IR remote control from TV/Display which may be located some distance away.




Have a look at the instruction sheet here (Acrobat pdf file)



PRODUCT FEATURES
* Transmit up to 100M Uncompress 1080p HDMI signal via CAT5e/6/7 Cables
* 10.2Gbps Ulrat High Performance Transmission support up to 4Kx2K Resolution
* HDMI V1.4 3D Video Format Support for 3D blu-ray and TV connection at distance
* 36 bit Deep Color & CEC Pass Thru support
* POC (Power Over CAT5) support, Receiver no need Power Adapter
* Ethernet Extend support, 3 x 100Mbps Ethernet RJ-45 switch at both Sender & Receiver
* Full range 20~60Khz IR Pass-Thru allows to control Video Source from receiver side
* Two Way RS-232 Control communication for Display or video Source control at remote site
* DVI 1.0 & HDCP compliant
* Hassle free plug-n-play, install in sec
* HD Audio/ Video/Internet/ IR& RS232/Power, all in ONE SINGLE Cable Link
* Application: 1). Home Theater Projector Installation 2). Multi-Room HD AV & Internet Sharing 3). Conference Room Projector & Control Integration 4).Shopping Mall/ Hotel/ Pub/Club/ Restaurant HD AV Extention 5). HD AV, Internet & Control Extension Deploy 6). Pro AV Center Control Integration



PRODUCT SPECIFICATION
* HDMI Spec.:1.4 Compatible
* DVI Spec.:1.0 Compliant
* HDCP Spec.:1.1 Compliant
* Data Speed:Up to 10.2Gbps
* Ethernet Network Data Spe:100/10 Base-TX
* Ethernet Port: 3x RJ-45 Ports at Sender & Receiver
* RS-232c connector:DB-9 Stanard Female Connector, Bi-direction transfer & up to 192,000 bps
* IR Pass-Thru:Signal frequency 20-60Khz
* Sender Connector:HDMI Input*1, HD AV Link(RJ-45) Port*1, Ethernet RJ-45 Port*3, RS232c*1, IR Emiiter Port*1 DC 24V Input*1
* Receiver Connector:HDMI Onput*1, HD AV Link(RJ-45) Port*1, Ethernet RJ-45 Port*3, RS232c*1, IR Receiver Port*1
* Operating Temperature:0-70ºC
* Power Adapter:AC to DC Power Adapter 24V/1A
* Product Dimension:220x83x27mm
* Product Weight:380g for Sender, 380g for Receiver
* Optional Accessory:IR Emitter/ Receiver (included), wall mount kit(optional)

Accessories
Pair of mounting brackets (one pair needed per unit to be mounted) MK100